View V315B1-L01_4613728.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 1 tft lcd approval specification model no.: v315b1 - l01 lcd tv head division avp 3???? tvhd / pdd qra dept. ddiii ddii ddi approval approval approval approval 3?@ ?l?v a??a al?o lcd tv marketing and product management division product manager 3??y 1q?x customer: a pproved by: note: www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 2 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 5 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 7 3.1 tft lcd module 3.2 backlight inverter unit 3.2.1 ccfl(cold cathode fluorescent lamp) characteristics 3.2.2 inverter characteristics 3.2.3 inverter interface characteristics 4. block diagram ------------------------------------------------------- 12 4.1 tft lcd module 5. interface pin connection ------------------------------------------------------- 13 5.1 tft lcd module 5.2 backlight unit 5.3 inverter unit 5.4 block diagram of interface 5.5 lvds interface 5.6 color data input assignment 6. interface timing ------------------------------------------------------- 19 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 22 7.1 test conditions 7.2 optical specifications 8. definition of labels ------------------------------------------------------- 26 8.1 cmo module label 9. packaging ------------------------------------------------------- 27 9.1 packing specifications 9.2 packing method 10. precautions ------------------------------------------------------- 29 10.1 assembly and handling precautions 10.2 safety precautions 11. regulatory standards ------------------------------------------------------- 29 11.1 safety 12. mechanical characteristics ------------------------------------------------------- 30 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 3 revision history version date page (new) section description ver 2.0 ver2.1 aug. 7,?06 oct. 12,?06 all 9 30,31,32 all 3.2.2 12 approval specification was first issued. update power consumption value (w) : typ. 120 ? 110, max. 134 ? 120. modify mechanical characteristics. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 4 1. general description 1.1 overview v315b1- l01 is a 31.5? tft liquid crystal display module with 16-ccfl backlight unit and 1ch-lvds interface. this module supports 1366 x 768 wxga format and can display true 16.7m colors ( 8-bit colors). the inverter module for backlight is built-in. 1.2 features - high brightness (500 nits) - ultra-high contrast ratio (1500:1) - faster response time (gray to gray average 6.5ms) - high color saturation ntsc 72% - ultra wide viewing angle : 176(h)/176(v) (cr>20) with super mva technology - de (data enable) only mode - lvds (low voltage differential signaling) interface - 180 degree rotation display (option) - color reproduction (nature color) - low color shift function 1.3 application - tft lcd tvs - multi-media display 1.4 general specificati0ns item specification unit note active area 697.6845 (h) x 392.256 (v) (31.51" diagonal) mm bezel opening area 703.8 (h) x 398.4 (v) mm (1) driver element a-si tft active matrix - pixel number 1366 x r.g.b. x 768 pixel pixel pitch (sub pixel) 0.17025(h) x 0.51075 (v) mm pixel arrangement rgb vertical stripe - display colors 16.7m color display operation mode transmissive mode / normally black - surface treatment anti-glare coating (haze 25%),hard coating (3h) - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 759 760 761 mm (1) vertical(v) 449 450 451 mm (1) depth(d) 36.95 37.95 38.95 mm to pcb cover module size depth(d) 46.4 47.4 48.4 mm to inverter cover weight 6300 6500 6700 g note (1) please refer to the attached drawings for more information of front and back outline dimensions. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 5 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 50 g (3), (5) vibration (non-operating) v nop - 1.0 g (4), (5) note (1) temperature and relative humidity range is shown in the figure below. (a) 90 %rh max. (ta ?? 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the maximum operating temperature is based on the test condition that the surface temperature of display area is less than or equal to 65 oc with lcd module alone in a temperature controlled chamber. thermal management should be considered in final product design to prevent the surface temperature of display area from being over 65 oc. the range of operating temperature may degrade in case of improper thermal management in final product design. note (3) 11 ms, half sine wave, 1 time for x, y, z. note (4) 10 ~ 200 hz, 10 min, 1 time each x, y, z. note (5) at testing vibration and shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 90 80 40 60 20 10 storage range www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 6 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage vcc -0.3 6.0 v input signal voltage v in -0.3 3.6 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lam p volta g e v w ?e 3000 v rms power su pp l y volta g e v b l 030v ( 1 ) control si g nal level ?e -0.3 7 v ( 1 ), ( 3 ) note (1) permanent damage to the device may occur if maximum values are exceeded. functional operation should be restricted to the conditions described under normal operating conditions. note (2) no moisture condensation or freezing. note (3) the control signals includes backlight on/off control, i_pwm control, e_pwm control and err signal for inverter status output. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 7 3. electrical characteristics 3.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage v cc 4.5 5.0 5.5 v (1) power supply ripple voltage v rp - - 100 mv rush current i rush - - 4 a (2) white - 1.60 2.2 a black - 0.90 - a power supply current vertical stripe i cc - 1.40 - a (3) differential input high threshold voltage v lvth - - +100 mv differential input low threshold voltage v lvtl -100 - - mv common input voltage v lvc 1.125 1.25 1.375 v lvds interface terminating resistor r t - 100 - ohm input high threshold voltage v ih 2.7 - 3.3 v cmos interface input low threshold voltage v il 0 - 0.7 v note (1) the module should be always operated within above ranges. note (2) measurement conditions: vcc rising time is 470us 470us +5v gnd 0.9vcc 0.1vcc vr1 47k q2 2n7002 (low to high) (control signal) sw r2 1k c1 0.01uf vcc c3 1uf (lcd module input) fuse r1 +5.0v q1 si4435dy 1k www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 8 note (3) the specified power supply current is under the conditions at vcc = 5 v, ta = 25 2 oc, f v = 60 hz, whereas a power dissipation check pattern below is displayed. 3.2 backlight inverter unit 3.2.1 ccfl (cold cathode fluorescent lamp) characteristics ( ta = 2 5 2 oc) value parameter symbol min. typ. max. unit note lamp voltage v w - 1250 - v rms i l = 5.2ma lamp current i l 4.7 5.2 5.7 ma rms (1) - - 2450 v rms ( 2 ) , ta = 0 oc lamp starting voltage v s - - 2360 v rms ( 2 ) , ta = 25 oc operating frequency f o 40 - 70 khz (3) lamp life time l bl 50,000 - hrs (4) active area c. vertical stripe pattern r r r r r r r r g g g g b b b b b b g g g g b b b b r r active area active area a. white pattern b. black pattern www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 9 3.2.2 inverter characteristics ( ta = 25 2 oc) value parameter symbol min. typ. max. unit note power consumption p bl - 110 120 w (5),(6), i l = 5.2ma input voltage v bl 22.8 24 25.2 v dc in p ut current i bl -5.0- a non dimmin g input ripple noise - - - 500 mv p-p v bl =22.8v 2450 -- v rms ta = 0 oc backlight turn on voltage v bs 2360 -- v rms ta = 25 oc oscillating frequency f w 55 58 61 khz dimming frequency f b 150 160 170 hz minimum duty ratio d min - 20 - % note (1) lamp current is measured by utilizing high frequency current meters as shown below: note (2) the lamp starting voltage v s should be applied to the lamp for more than 1 second under starting up duration. otherwise the lamp could not be lighted on completed. note (3) the lamp frequency may produce interference with horizontal synchronous frequency of the display input signals, and it may result in line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible. note (4) the life time of a lamp is defined as when the brightness is larger than 50% of its original value and the effective discharge length is longer than 80% of its original length (effective discharge length is defined as an area that has equal to or more than 70% brightness compared to the brightness at the center point of lamp.) as the time in which it continues to operate under the www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 10 condition at ta = 25 ? 2 j and i l = 4.7 ~ 5.7 ma rms . note (5) the power supply capacity should be higher than the total inverter power consumption p bl . since the pulse width modulation (pwm) mode was applied for backlight dimming, the driving current changed as pwm duty on and off. the transient response of power supply should be considered for the changing loading when inverter dimming. note (6) the measurement condition of max. value is based on 31.5" backlight unit under input voltage 24v, average lamp current 5.5 ma and lighting 30 minutes later. 3.2.3 inverter interface characteristics no item symbol test condition min type max unit note (1-2) 1 error signal err ?e ?e ?e ?e ?e (note 2) on ?e 2.0 ?e 5.0 v 2 on/off control voltage off v blon ?e 0 ?e 0.8 v max ?e ?e ?e 3.3 v maximum duty ratio 3 internal pwm control voltage min v ipwm ?e ?e 0 ?e v minimum duty ratio hi ?e 2.0 ?e 5.0 v on duration 4 external pwm control voltage lo v epwm ?e 0 ?e 0.8 v off duration 5 control signal rising time tr ?e ?e ?e 100 ms 6 control signal falling time tf ?e ?e ?e 100 ms 7 on/off delay time t on ?e 500 ?e ?e ms 8 on/off off time t off ?e 500 ?e ?e ms 9 pwm signal rising time t pwmr ?e ?e ?e 50 us 10 pwm signal falling time t pwmf ?e ?e ?e 50 us note (1) the power sequence and control signal timing are shown as the following figure 1. note (2) when inverter protective function is triggered, err w ill output open collector status; in normal operation, the signal of err will output a low level voltage. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 11 2.0v 0.8v tr tf backlight on duration 0 v epwm 3.3v v ipwm t pwmr v w ton minimun duty 100% pwm duty v bl v blon 0 0 0 2.0v 0.8v t pwmf toff external pwm period external figure 1 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 12 4. block diagram 4.1 tft lcd module tft lcd panel (1366x3x768) data driver ic scan driver ic dc/dc converter & reference voltage input connector (jae,fi-e30s) or e q ual gnd vcc frame buffer rx0(+/-) rx1(+/-) rx2(+/-) rx3(+/-) rxclk ( +/- ) timing controller backlight unit inverter connector cn1:s14b-ph-sm3-tb(d)(lf)(jst) or equivalent cn3-cn10: sm02(8.0)b-bdbs-1(lf)(sn) or e q uivalent cn1 cn2: s2b-zr-sm3a-tf (d)(lf)(jst) or equivalent gnd e_pwm i_pwm blon vbl err www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 13 5. interface pin connection 5.1 tft lcd module cnf1 connector pin assignment pin no. s y mbol descri p tion note 1 odsel overdrive looku p table selection ( 2 ) 2 rpf dis p la y rotation ( 3 ) 3 nc no connection ( 4 ) 4 gnd ground 5 rx0- ne g ative transmission data of p ixel 0 6 rx0+ positive transmission data of p ixel 0 7 gnd ground 8 rx1- ne g ative transmission data of p ixel 1 9 rx1+ positive transmission data of p ixel 1 10 gnd ground 11 rx2- ne g ative transmission data of p ixel 2 12 rx2+ positive transmission data of p ixel 2 13 gnd ground 14 rxclk- ne g ative of clock 15 rxclk+ positive of clock 16 gnd ground 17 rx3- ne g ative transmission data of p ixel 3 18 rx3+ positive transmission data of p ixel 3 19 gnd ground 20 nc no connection ( 4 ) 21 sellvds select lvds data format ( 5 ) 22 nc no connection ( 4 ) 23 gnd ground 24 gnd ground 25 gnd ground 26 vcc power su pp l y : +5v 27 vcc power su pp l y : +5v 28 vcc power su pp l y : +5v 29 vcc power su pp l y : +5v 30 vcc power su pp l y : +5v note (1) connector part no.: fi-e30s(jae) or compatible note (2) overdrive lookup table selection. the overdrive lookup table should be selected in accordance to the frame rate to optimize image quality. odsel note l or o p en looku p table was o p timized for 60 hz frame rate. h looku p table was o p timized for 50 hz frame rate. note (3) low or open: normal display (default), high : display with 180 degree rotation note (4) reserved for internal use. left it open. note (5) ground: jeida, high or open: normal lvds format please refer to 5.5 lvds interface (page 17) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 14 5.2 backlight unit the pin configuration for the housing and leader wire is shown in the table below. cn3-cn10 (housing): bdbr-03(4.0)v-1s or equivalent pin no. symbol description wire color 1 hv high voltage white 2 hv high voltage pink 3 hv high voltage blue 4 hv high voltage white note (1) the backlight interface housing for high voltage side is a model bdbr-03(4.0)v-1s, manufactured by jst or equivalent . the mating header on inverter part number is sm02(8.0)b-bdbs-1-tb(lf) cn2 (housing): zhr-2 (jst) or equivalent pin no. symbol description wire color 1 lv low voltage (+) black 2 lv low voltage (-) white note (2) the backlight interface housing and return cable for low voltage side is a model zhr-2 , manufactured by jst or equivalent. the mating header on inverter part number is s2b-zr-sm3a-tf(d)(lf) or equivalent. 8 female connectors bdbr-03(4.0)v-1s or equal zhr-2 or equal return cable 1.lv(black) 2.lv(white) 1.hv(white,+) 4.hv(white,-) 2.hv(pink,+) 3.hv(blue,-) 4.hv(white,-) 1.hv(white,+) 3.hv(blue,-) 2.hv(pink,+) 4.hv(white,-) 1.hv(white,+) 3.hv(blue,-) 2.hv(pink, + ) 4.hv(white,-) 1.hv(white,+) 3.hv(blue,-) 2.hv(pink,+) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 15 5.3 inverter unit cn1(header): s14b-ph-sm3-tb(d)(lf)(jst) or equivalent.. pin no. symbol description 1 2 3 4 5 vbl +24v power input 6 7 8 9 10 gnd ground 11 err normal (gnd) abnormal ( open collector) 12 blon backlight on/off control 13 i_pwm internal pwm control signal 14 e_pwm external pwm control signal notice: #pin 13:analog dimming control (use pin 13) : 0v~3.3v and pin 14 must open. #pin 14:pwm dimming control (use pin 14) : pin 13 must open. #pin 13(i_pwm) and pin 14(e_pwm) can not open in same period. cn2(header): s2b-zr-sm3a-tf(d)(lf)(jst) or equivalent pin no. symbol description 1 ccfl cold ccfl low voltage (+) 2 ccfl cold ccfl low voltage (-) cn3-cn10 (header): sm02(8.0)b-bdbs-1(lf)(sn) or equivalent. pin no. symbol description 1 ccfl hot ccfl high voltage 2 ccfl hot ccfl high voltage www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 16 5.4 block diagram of interface cnf1 r0~r7 : pixel r data , g0~g7 : pixel g data , b0~b7 : pixel b data , de : data enable signal note (1) the system must have the transmitter to drive the module. note (2) lvds cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is used differentially. r0-r7 g0 - g 7 b 0 -b7 de host graphics controller txin pll pll r0-r7 g0 - g 7 b 0 -b7 de dclk timing controller lvds transmitter thc63lvdm83a (lvdf83a) lvds receiver thc63lvdf84a rx0+ rx 0 - rx1+ rx1- rx2+ rx2- clk+ clk - rxout 51 [ 51 [ 51 [ 51 [ 51 [ 51 [ 51 [ 51 [ 51 [ 51 [ 100pf 100 p f 100pf 100pf 100pf rx3 - rx3+ www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 17 5.5 lvds interface signal transmitter thc63lvdm83a interface connector receiver thc63lvdf84a tft control input sellvds= h or open sellvds= l pin input host tft-lcd pin output sellvds= h or open sellvds =l r0 r1 r2 r3 r4 r5 g0 g1 g2 g3 g4 g5 b0 b1 b2 b3 b4 b5 de r6 r7 g6 g7 b6 b7 rsvd 1 rsvd 2 rsvd 3 r2 r3 r4 r5 r6 r7 g2 g3 g4 g5 g6 g7 b2 b3 b4 b5 b6 b7 de r0 r1 g0 g1 b0 b1 rsvd 1 rsvd 2 rsvd 3 51 52 54 55 56 3 4 6 7 11 12 14 15 19 20 22 23 24 30 50 2 8 10 16 18 25 27 28 txin0 txin1 txin2 txin3 txin4 txin6 txin7 txin8 txin9 txin12 txin13 txin14 txin15 txin18 txin19 txin20 txin21 txin22 txin26 txin27 txin5 txin10 txin11 txin16 txin17 txin23 txin24 txin25 ta out0+ ta out0- ta out1+ ta out1- ta out2+ ta out2- ta out3+ ta out3- rx 0+ rx 0- rx 1+ rx 1- rx 2+ rx 2- rx 3+ rx 3- 27 29 30 32 33 35 37 38 39 43 45 46 47 51 53 54 55 1 6 7 34 41 42 49 50 2 3 5 rx out0 rx out1 rx out2 rx out3 rx out4 rx out6 rx out7 rx out8 rx out9 rx out12 rx out13 rx out14 rx out15 rx out18 rx out19 rx out20 rx out21 rx out22 rx out26 rx out27 rx out5 rx out10 rx out11 rx out16 rx out17 rx out23 rx out24 rx out25 r0 r1 r2 r3 r4 r5 g0 g1 g2 g3 g4 g5 b0 b1 b2 b3 b4 b5 de r6 r7 g6 g7 b6 b7 nc nc nc r2 r3 r4 r5 r6 r7 g2 g3 g4 g5 g6 g7 b2 b3 b4 b5 b6 b7 de r0 r1 g0 g1 b0 b1 nc nc nc 24 bit dclk 31 txclk in txclk out+ txclk out- rxclk in+ rxclk in- 26 rxclk out dclk r0~r7: pixel r data (7; msb, 0; lsb) g0~g7: pixel g data (7; msb, 0; lsb) b0~b7: pixel b data (7; msb, 0; lsb) de : data enable signal notes(1) rsvd(reserved)pins on the transmitter shall be ?h? or( ?l? or open) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 18 5.6 color data input assignment the brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. the higher the binary input, the brighter the color. the table below provides the assignment of color versus data input. data signal red green blue color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta ye ll o w white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(253) red(254) red(255) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0) / dark green(1) green(2) : : green(253) green(254) green(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(253) blue(254) blue(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 19 t vd t vb t v t h 6. interface timing 6.1 input signal timing specifications the input signal timing specifications are shown as the following table and timing diagram . si g nal item s y mbol min. t yp . max. unit note fre q uenc y 1/tc 60 86 88 mh z lvds receiver clock input cycle to cycle jitter trcl - - 200 ps setup time tlvsu 600 - - ps lvds receiver data hold time tlvhd 600 - - ps fr 5 47 50 53 hz frame rate fr 6 57 60 63 hz (2) total tv 778 795 888 th tv=tvd+tvb dis p la y tvd 768 768 768 th - vertical active display term blank tvb 10 27 120 th - total th 1442 1798 1936 tc th=thd+thb dis p la y thd 1366 1366 1366 tc - horizontal active display term blank thb 76 432 570 tc - note (1) since this module is operated in de only mode, hsync and vsync input signals should be set to low logic level. otherwise, this module would operate abnormally. (2) please refer to 5.1 for detail information. input signal timing diagram de t hb valid display data (1366 clocks) t c dclk t hd de data www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 20 lvds receiver interface timing diagram rxclk+/- rxn+/- 14 1 t 14 3 t 14 5 t 14 7 t 14 9 t 14 11 t 14 13 t tlvsu tlvhd tc www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 21 0.5 ?? t 1 ?? 10ms 0 ?? t 2 ?? 50ms 0 ?? t 3 ?? 50ms 500ms ?? t 4 50% 0v 0v 50% t 6 t 5 t 3 t 1 0.1vcc 0.9 v cc 0.1v cc 0.9 v cc t 4 t 2 valid power on power off signals power on/off sequence backlight (recommended) 500ms ?? t 5 100ms ?? t 6 power supply v cc 6.2 power on/off sequence to prevent a latch-up or dc operation of lcd module, the power on/off sequence should be as the diagram below. note (1) the supply voltage of the external system for the module input should follow the definition of vcc. note (2) apply the lamp voltage within the lcd operation range. when the backlight turns on before the lcd operation or the lcd turns off before the backlight turns off, the display may momentarily become abnormal screen. note (3) in case of vcc is in off level, please keep the level of input signals on the low or high impedance. note (4) t4 should be measured after the module has been fully discharged between power off and on period. note (5) interface signal shall not be kept at high impedance when the power is on. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 22 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 5.0 v input signal according to typical value in "3. electrical characteristics" lamp current i l 5.2 0.5 ma oscillating frequency (inverter) f w 58 3 khz frame rate 60 hz 7.2 optical specifications the relative measurement methods of optical characteristics are shown in 7.2. the following items should be measured under the test conditions described in 7.1 and stable environment shown in note (6). item s y mbol condition min. t yp . max. unit note contrast ratio cr 1500 - - ( 2 ) response time gray to gray average - (6.5) (12) ms (3) center luminance of white l c 400 500 - cd / a vera g e luminance of white l ave 400 450 - cd / (4) white variation w - - 1.3 - ( 7 ) cross talk ct - - 4.0 % ( 5 ) rx 0.643 - red r y 0.333 - gx 0.272 - green g y 0.595 - bx 0.144 - blue b y 0.069 - wx 0.280 - white w y typ -0.03 0.285 typ +0.03 - (6) color chromaticity color gamut cg x =0 , y =0 viewing normal angle 70 72 % ntsc x + 80 88 - horizontal x - 80 88 - y + 80 88 - viewing angle vertical y - cr 20 80 88 - deg . (1) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 23 note (1) definition of viewing angle ( x, y): viewing angles are measured by ez-contrast 160r (eldim) note (2) definition of contrast ratio (cr): the contrast ratio can be calculated by the following expression. contrast ratio (cr) = l255 / l0 l255: luminance of gray level 255 l 0: luminance of gray level 0 cr = cr (5), where cr (x) is corresponding to the contrast ratio of the point x at the figure in note (7). note (3) definition of gray to gray switching time : 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o optical response 100% 90% 10% 0% gray to gray switching time t ime gray to gray switching time www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 24 the driving signal means the signal of gray level 0, 63, 127, 191, 255. gray to gray average time means the average switching time of gray level 0 ,63,127,191,255 to each other . note (4) definition of luminance of white (l c , l ave ): measure the luminance of gray level 255 at center point and 5 points l c = l (5) l ave = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 where l (x) is corresponding to the luminance of the point x at the figure in note (7). note (5) definition of cross talk (ct): ct = | y b ? y a | / y a 100 (%) where: y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) a ctive area y a, u (d/2,w/8) y a, r (7d/8,w/2) y a, d (d/2,7w/8) y a, l (d/8,w/2) (0, 0) ( d,w ) gray 128 a ctive area gray 0 (d/4,w/4) (3d/4,3w/4) ( 0, 0 ) y b, u (d/2,w/8) y b, r (7d/8,w/2) y b, d (d/2,7w/8) y b, l (d/8,w/2) ( d,w ) gray 128 gray 0 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 25 note (6) measurement setup: the lcd module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 1 hour in a windless room. note (7) definition of white variation ( w): measure the luminance of gray level 255 at 5 points w = maximum [l (1), l (2), l (3), l (4), l (5)] / minimum [l (1), l (2), l (3), l (4), l (5)] d w active area vertical line horizontal line : test point x=1 to 5 5 12 34 d/4 d/2 3d/4 w/4 w/2 3w/4 x lcd module lcd panel center of the screen display color analyzer (minolta ca210) light shield room (ambient luminance < 2 lux) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 26 made in taiwan e207943 8. definition of labels 8.1 cmo module label the barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a) model name: V315B1-L01 (b) revision: rev. xx, for example: a0, a1? b1, b2? or c1, c2?etc. (c) serial id: x x x x x x x y m d l n n n n serial id includes the information as below: (a) manufactured date: year: 0~9, for 2000~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i ,o, and u. (b) revision code: cover all the change (c) serial no.: manufacturing sequence of product (d) product line: 1 -> line1, 2 -> line 2, ?etc. product line year, month, date cmo internal use cmo internal use revision cmo internal use serial no. chi mei optoelectronics x x x x x x x y m d l n n n n v315b1 -l01 rev. xx www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 27 9. packaging 9.1 packing specifications (1) 4 lcd tv modules / 1 box (2) box dimensions : 906(l) x 384 (w) x 580 (h) (3) weight : approximately 31.5kg ( 4 modules per box) 9.2 packing method figures 9-1 and 9-2 are the packing method lcd tv module anti-static bag carton carton label cushion(bottom) 2 pcs drier figure.9-1 packing method www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 28 air transportation sea transportation pp belt carton label corner protector:l1130*50mm*50mm gross:300kg pallet stack:l950*w1180*h1880mm pallet:l950*w1180*h140mm corner protector:l1400*50mm*50mm gross:205kg corner protector:l1130*50mm*50mm pallet stack:l950*w1180*h1300mm pallet:l950*w1180*h140mm pe sheet pe sheet carton label pp belt figure. 9-2 packing method www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 29 10. precautions 10.1 assembly and handling precautions (1) do not apply rough force such as bending or twisting to the module during assembly. (2) it is recommended to assemble or to install a module into the user?s system in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) do not apply pressure or impulse to the module to prevent the damage of lcd panel and backlight. (4) always follow the correct power-on sequence when the lcd module is turned on. this can prevent the damage and latch-up of the cmos lsi chips. (5) do not plug in or pull out the i/f connector while the module is in operation. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) moisture can easily penetrate into lcd module and may cause the damage during operation. (9) high temperature or humidity may deteriorate the performance of lcd module. please store lcd modules in the specified storage conditions. (10) when ambient temperature is lower than 10oc, the display quality might be reduced. for example, the response time will become slow, and the starting voltage of ccfl will be higher than that of room temperature. 10.2 safety precautions (1) the startup voltage of a backlight is over 1000 volts. it may cause an electrical shock while assembling with the inverter. do not disassemble the module or insert anything into the backlight unit. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) after the module?s end of life, it is not harmful in case of normal operation and storage. 11. regulatory standards 11.1 safety regulatory item standard ul ul 60950-1: 2003 cul can/csa c22.2 no.60950-1-03 information technology equipment cb iec 60950-1:2001 ul ul 60065: 2003 cul can/csa c22.2 no.60065-03 audio/video apparatus cb iec 60065:2001 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 30 12. mechanical characteristics chi mei ?_?1qla?|3--?q www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 31 chi mei ?_?1qla?|3--?q www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: oct. 12, 2006 model no.: v315b1 - l01 approval version 2.1 32 chi mei ?_?1qla?|3--?q www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of V315B1-L01

	To Download V315B1-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .